KELVIN EPOS-600 LED SPOT (RGB)

1071674

Neuf

SKU: 1071674
Kelvin Epos 600 lamp head
Kelvin Epos 600 controller & PSU
1 x Kelvin High Performance Lens for Epos Series
1 x Kelvin Epos Dome Diffuser
1 x Kelvin Epos Medium Diffuser D90
1 x Kelvin Epos Umbrella Mount
1 x Kelvin Travel Pouch for Lighting, Video and Photo Accessory
1 x Kelvin Epos Reflector (62°)
1 x Kelvin Epos 600 10-pin XLR head cable (8 m / 26.2 ft)
1 x Neutrik powerCON True1 AC power cable (8 m / 26.2 ft)
1 x Kelvin Epos 600 rolling case
1 x Protective cap for Epos 600 controller
1 x Quick release lighting super clamp

- +

En savoir plus  
Kelvin Epos 600 RGB LED Monolight (Travel Kit)

Boasting the ultimate in color control, the Epos 600 Travel Kit from Kelvin has an RGBACL light engine design combined with a highly efficient output and IP54-certified weather resistance. This powerful 600W lamp head delivers improved performance with precise power control that regulates its output to an accuracy of 0.1%. Featuring a generous variable color temperature of 2000 to 20,000K, this full-color monolight provides bright and 0 to 100% dimmable lighting for video and still productions. The COB LED component can produce an immense amount of highly accurate colors with high CRI, TLCI, CQS, and SSI ratings. Another user perk is expanded CCT, HSI, RGB, gels, effects, and XY modes to suit any lighting requirement.

You can easily control the fixture from a distance via an app using your smartphone and the Kelvin Narrator app. The app gives you access to built-in lighting effects with the ability to create your own custom sequences. In addition, the included controller box allows adjustments by a touchscreen and analog selectors while supporting wired DMX and wireless LumenRadio. This all-in-one unit runs on AC voltage—simply plug the included 26.2' power cable into an AC outlet, and you're ready to shoot. For use in locations where power mains are unavailable, the Epos 600 can also run on separately available battery power stations or block batteries. The light comes with a standard Bowens accessory mount for its included 55° reflector and wide compatibility with optional softboxes and many other modifiers for an additional level of light control. A water-resistant semi-soft rolling carry case is supplied for storage and portability.

Cantastoria Six-Color Light Engine

RGBACL LED chips produce highly accurate and saturated colors with more output compared to RGBWW lights. The Epos 600 is built around the Cantastoria Engine, which doesn't use white LEDs. Instead, it mixes red, green, blue, amber, cyan, and lime LEDs to produce white light and any other color. This broad color control range gives you a wide color palette to choose from.

Epos Controller

5" TFT LCD with touchscreen and analog selectors

Includes weatherproof 4-pin head cable, 26.2' long

Includes Neutrik AC power cable, 26.2' long

Extended Control Methods

Bluetooth operation with Kelvin Narrator app from up to 262' away

Integrated 5-pin XLR DMX

LumenRadio/Wireless DMX operation from up to 328' away

Construction Details

600W full-spectrum LED COB studio light

93° beam angle

360° tilting yoke with 5/8" and 1-1/8" combination mount for either a junior/baby optional stand

Rated IP54 for weather and dust resistance

Sturdy aluminum housing to better conduct heat away from the light

Includes super clamp and 22 x 15 x 13" rolling case

Kelvin D100 Light Diffuser for Epos LED Monolight

This D100 Light Diffuser from Kelvin creates a more flattering image by diffusing the output from the Epos monolight's COB LED light source. Diffused light disperses light evenly across a subject and softens shadows, producing a more flattering image.

The D100 light-grade diffuser is the thinnest diffusion available for the Epos 300, and possibly any full spectrum COB. It is just thick enough to mix the colors while still maintaining as hard a source as possible, ideal for the hardest shadows and the punchiest lights.

Kelvin D90 Medium Diffuser for Epos LED Monolight

This D90 Medium Diffuser from Kelvin creates a more flattering image by diffusing the output from the Epos monolight's COB LED light source. Diffused light disperses light evenly across a subject and softens shadows, producing a more flattering image.

The D90 medium-grade diffuser offers a slightly thick diffusion but with minimal light loss of less that 0.2 of a stop. It extends the beam angle slightly, which makes it a good match for use with large softboxes or with less precise optical accessories.

Kelvin D75 Heavy Diffuser for Epos LED Monolight

This D75 Heavy Diffuser from Kelvin creates a more flattering image by diffusing the output from the Epos monolight's COB LED light source. Diffused light disperses light evenly across a subject and softens shadows, producing a more flattering image.

The D75 heavy-grade diffuser is the heaviest of Epos diffusers, while still maintaining a minimum light loss of less than 0.2 stops. It widens the beam by a few degrees, making it a suitable match for use with smaller softboxes or when optical accessories require a wider beam for optimal performance.

Kelvin Dome Diffuser for Epos 300 LED Monolight

The Kelvin Dome Diffuser is a light modifier for the Epos 300 LED moonlight. It can be used in conjunction with umbrellas, parabolic accessories, or softboxes. It allows the light output to spread in a very wide beam angle of 180 degrees. The dome creates a point of light, which makes most out of the silver in softboxes and other modifiers in the same way a tungsten bulb traditionally would. It creates the same beautiful wraparound light found with traditional lighting modifiers.

Kelvin Umbrella Mount Set for Epos 300 LED Monolights

This Epos Umbrella Mount Set from Kelvin attach quickly to the Epos monolight's chassis and allows virtually any kind and size of umbrella to be attached. The large clamps make it easy to adjust the umbrella and secure it in place. These mounts allow umbrellas to be used in combination with Epos dome diffusers and other modifiers.


 
    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu