Kiloview 12G-SDI/ NDI Bi-Directional videoencoder
Kiloview N30 for NDI supports up to UHD 4Kp60 video input (Encoder) or 4K/60 video output (Decoder). The converter is small and compact enough to put in your pocket with the overall size of 100x80x24mm. It features an HDMI2.0 input and HDMI2.0 loop through for preview while NDI streaming, or HDMI 2.0 output while decoding. A tally light is built-in for indicating which camera is in program or preview. It also has the 3.5mm audio input/output which supports intercom.
Kiloview N20 for NDI has a wide DC input range from 5V to 18V, so it can be easily powered by USB, power bank or camera battery, it can also be powered over Ethernet (PoE). A threaded screw camera mount is provided for your mounting on a camera. PTZ Control over USB adapter/Ethernet is supported.
Features
- 1x RJ45 + PoE
- Threaded screw camera mount
- Tally Light
- 3.5mm Audio Input/Output
- Intercom supported
- PTZ Control via USB/Ethernet
- DC 5V-18V power supply
- Compact design
- All NewTek NDI enabled encoding or streaming sotware supported, Newtek NDI, OBS, Xsplit, vMix VidBlaster, Wirecast MimoLive, Streamstar
|
Specifications
|
|
Video input
|
1 x 12G-SDI
|
Video output
|
1 x 12G-SDI
|
Analog audio
|
1 x 3.5mm Headphone (out) / Microphone (input)
|
Network
|
1 x RJ45 (with PoE), 100/1000Mbps Ethernet
|
Video formats
|
Up to UHD 4Kp60 (downward compatible with SD/HD/VESA and custom resolutions)
|
NDI encoding and decoding
|
1 x NDI encoding or 1 x NDI decoding
|
NDI Codec features
|
YCbCr 4:2:2 HD video encoding
typical bitrate 250Mbps@4Kp60, 125Mbps@1080p60
|
Power supply
|
DC 5-18V, PoE supported
|
Voice intercom
|
Supported (Kiloview software required)
|
PTZ control
|
Supported
|
DHCP
|
Supported
|
Management
|
Web page / IMS remote management
|
Dimensions
|
100x95x24mm
|
Power consumption
|
DC 12V 1A
|
Power consumption
|
6w
|
Operating temperature
|
-20℃~45℃
|
Compatible software tested
|
Newtek NDI, OBS, Xsplit, vMix VidBlaster, Wirecast MimoLive, Streamstar
|