SOUND DEVICES 888 MIXER / RECORDER

1018095

Neuer Artikel

SKU: 1018095
O   1 x Audio Mixer
O   1 x XLR mini to 2x XLR3 female cable
O   1 x XLR mini to 1x mini-jack cable
O   1 x Tentacle mini jack to lemo 5 cable
O   1 x Power hirose to D-Tap cable
O   4 x XLR3 male to XLR mini cable
O   4 x XLR3 female to XLR mini cable
O   1 x Power Supply  
       1 x Power cord 3 pins
O   1 x Card Reader
      1 x USB-C to USB-c cable
      1 x USB-C to USB3 cable
O   1 x Antenna
O   2 x Pouch

- +

Mehr Infos  
Sound-Devices Mixer/Recorder

Meet the 888 – the portable mixer-recorder that’s compact and light enough to use in a bag, yet has the high channel count and power required for mobile cart productions. The 888 is the smallest portable mixer-recorder on the market that offers Dante for sending and receiving audio over Ethernet. With 8 ultra low-noise, 8-Series microphone preamplifiers, 16 channels, 20 tracks, multiple powering methods, and support for multiple USB control surfaces, the 888 can be easily tailored to your workflow. An updated processing architecture and multiple FPGAs enables the 888 to be fully routable: any physical input may be sent to any track, bus, or output. 

Many features have carried over from the premium Sound Devices’ Scorpio, such as the new 8-Series preamplifier design, 2 SD card slots, internal 256GB SSD, and dual L-Mount battery charging and powering. Alternatively, power your 888 using a smart battery, NP-1 battery, or an in-line power supply via its TA4 DC input. The ultra-accurate, fully-featured timecode generator contains its own battery to hold timecode for up to four hours after power off. 

Dedicated coms and slate allows for professional bi-directional communication with other crew members. Send customized mixes to the camera or crew with multiple mix buses. With the ability to record to three media simultaneously, you can turn over an SD card to production, AAC files for transcription, and keep a backup on the internal 256 GB SSD.

A built-in three band EQ may be set to either pre- or post-fade for each channel to tackle any problems directly on-set. Enable Dugan Automixing or MixAssist to automatically attenuate unused microphones in multi-microphone applications. Up to 16 channels can be automixed at a time. If you are recording in a noisy environment, enable the optional NoiseAssist plugin to suppress common background noises instantly on-location.

Get the perfect fit on your cart with the Sound Devices CL-16 or one of several other supported USB control surfaces for remote fader and transport control. Download the companion Android and iPad app, SD-Remote, to access to transport controls, metering, and sound reports on a large touch screen.

Features

- 8 ultra low-noise, 8-Series microphone preamplifiers

- 16 channels, 10 buses, 20 tracks

- 16 channels of Dante I/O

- 256 GB internal SSD, 2 SD card slots

- USB control surface support via MCU

- Dugan Automixing or MixAssist for up to 16 channels

 

 



Specifications



 



Analog Inputs



 



Frequency Response



10 Hz to 80 kHz ± 0.5 dB (192 kHz sample rate, re 1 kHz)



THD + Noise



0.005% max (mic in, 1 kHz, 22 Hz–22 kHz BW, trim at 20, fader at 0, -10 dBu in)



Equivalent Input Noise



-131 dBV (-129 dBu) max (mic in, A-weighting, 76 dB gain, 150 ohm source impedance)



Processing Engine



Highly extensible, full FPGA-based audio processing, 3 FPGAs



Six-way ARM multiprocessor system



64-bit audio processing precision



Audio Over Ethernet



Dante, AES67 compatible



16 channels in, 16 channels out (up to 192 kHz)



1 Gb/s Ethernet, 1 port, transformer-balanced



Inputs



 



Mic/Line inputs



8 total, all fully featured; 4 on full-size XLR, 4 on TA3



Inputs



Mic-level inputs: (XLR, TA3): Class-A, discrete differential long-tail pair, 4k ohm input impedance

Line-level inputs: (XLR, TA3): active-balanced, 4k ohm input impedance

48V phantom: full 10mA to all 8 inputs simultaneously

12 Total analog inputs: 8 mic-line inputs, 4 on returns 

AES3 or AES42 available on XLR input 1

AES42: +10 V, 250 mA available, mode-1, auto-ASRC

USB Audio: 2 Inputs

Rtn A (TA3): unbalanced 2-channel, 4k ohm input impedance

Rtn B (3.5 mm): unbalanced 2-channel, 4k ohm input impedance

Com Rtn (TA3) balanced, 1-channel, 8k ohm input impedance

External Slate Mic (TA5): balanced, 8k ohm input impedance


Maximum Input Level



Mic: +8 dBu (2.0 Vrms)

Line: +28 dBu (19.5 Vrms)

Rtn A, B: +18 dBu (6.2 Vrms)

Com Rtn: +24 dBu (12.3 Vrms)

External Slate Mic: +12 dBu (3.2 Vrms)


High-Pass Filters



Adjustable 10 Hz to 320 Hz, 18 dB/oct. 1st stage analog (before preamp), 2nd stage digital.



Limiters



Limiters available at all channels, buses and headphones for all sample rates

Analog first stage, all subsequent stages digital

Attack time: 1 ms

Release time: adjustable, 50 ms to 1000 ms

Threshold: adjustable, -2 dBFS to -12 dBFS

Selectable ratio: inf:1, 20:1, 18:1, 16:1, 14:1, 12:1, 10:1


Delay



Channel Adjustable 0-50 ms

Output Adjustable 0-500 ms


Maximum Gain



Trim stage (mic input): 76 dB

Trim stage (line input): 50 dB

Fader stage: 16 dB

Bus stage: 16 dB

Headphone stage: 20 dB

Mic-to-Line: 108 dB

Mic-to-Headphone: 112 dB


Outputs



 



Outputs



XLR (L, R) active-balanced, 250/3.2k/120 ohms (mic/-10/line)

TA3 (X1-X4) active-balanced, 250/3.2k/120 ohms (mic/-10/line)

3.5mm (X5, X6, X7, X8): unbalanced, stereo, 1.8k ohms


Headphone Outputs



¼”, 3.5 mm

TA5 (along with mic input pins) for single connection to headset + mic

High output, 4 ohm output impedance, 400 mW + 400 mW at each connector, all individually driven

Compatible with headphones of any impedance


Maximum Output Level (all into 10k load)



Line: +20 dBu (7.8 Vrms)

“-10”: +6 dBu (1.5 Vrms)

Mic: -20 dBu (0.078 Vrms)

X5/X6 Out: +6 dBu (1.5 Vrms)

Headphone outputs (¼”, TA-5, X7/X8): +14 dBu (4.0 Vrms)


Digital Outputs



AES3 transformer-balanced, in pairs; 1-2 (XLR-L), 3-4 (XLR-R),

110 ohm, 2 V p-p, AES and S/PDIF compatible


Recording



 



A/D Converters



32-bit, 120 dB, A-weighted dynamic range typical

Sampling rates 44.1 kHz, 47.952 kHz, 48 kHz, 48.048 kHz, 88.2 kHz, 96 kHz, 192 kHz


Bit Depth



16, 24



Recording



Internal 256 GB SSD; two removable SD Cards. Each 10% over-provisioned (reserved free space) for optimum performance

Simultaneous recording to internal SSD and the two SD cards

exFAT formatting

20 tracks (16 iso channels, 4 buses)

Broadcast WAV monophonic and polyphonic file format

64-bit WAV (RF64) monophonic and polyphonic; support for files > 4 GB

AAC 2 track at 48 kHz, selectable bit rate 32, 64, 128, 192, 256 kbps


Automatic Mixing



Dugan Automixer/MixAssist up to 16 channels on Left and Right Mix bus

MixAssist up to 16 channels on Left and Right Mix bus


Noise Suppression



Via optional paid NoiseAssist Plugin. Up to two instances of NoiseAssist can run on any combination of isolated channels, bus L, or bus R



USB



USB-C (USB 3.1 type 1) for file transfer of internal SSD, both SD Cards

USB-C 2-in/2-out USB audio interface

USB-A host for keyboard, external controller, external USB hubs supported for connecting multiple devices


Timecode and Sync



Modes Supported: Off, Rec Run, Free Run, 24h Run, External, including External Auto-Record and Continuous modes.

Frame Rates: 23.98, 24, 25, 29.97 DF, 29.97 ND, 30 DF, 30 ND

Sample/Timecode Accuracy: 0.1 ppm (0.25 frames per 24 hours)

Timecode Input: 20k ohm impedance, 0.3 V - 3.0 V p-p (–17 dBu - +3 dBu)

Timecode Output: 75 ohm impedance, 5 V p-p (+12 dBu)


Remote Control



Sound Devices CL-16 Linear Fader Controller

Sound Devices CL-12 Linear Fader Controller

USB MIDI MCU Control  - supported 3rd party fader controllers

SD-Remote Android app via USB or Bluetooth LE

SD-Remote iPad app via Bluetooth LE

USB Keyboard

External Timecode Record Trigger


LCD



320x240, Transflective, excellent sunlight visibility

Larger touchscreen display available via USB-connected SD-Remote app


Power



External: 10-18 V input on locking TA4 connectors, pin-4 = (+), pin-1 = (-), supports Smart Battery telemetry

Dual rear-mount Sony-style L-mount batteries with chargers


Current Draw, at 12 V no battery charging



All mic preamps off: 780 mA

All mic preamps on: 990 mA

All mic preamps on, 192 kHz sample rate, recording to 2 SD Cards: 1.13 A

All mic preamps on, 192 kHz sample rate, recording to 2 SD Cards, Dante enabled: 1.38 A


Environmental



Operating: -20° C to 60° C, 0 to 90% relative humidity (non-condensing)

Storage: -40° C to 85° C


Dimensions (H x W x D)



5.1 cm x 24.5 cm x 18.5 cm

2.0 in. x 10.0 in. x 7.3 in


Weight



4.0 lbs (unpackaged, without batteries)

1.83 kg (unpackaged, without batteries)



 


   Sie brauchen Hilfe?
    Sie brauchen Hilfe,
    brauchen Finanzierung,
    Rufen Sie uns an!

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menü

Copyright : Visuals 2003-2024