SOUND DEVICES MIXPRE-6 II
SOUND DEVICES MIXPRE-6 II
Neu

SOUND DEVICES MIXPRE-6 II

1016776

Neuer Artikel

SKU: 1016776
4 x XLR3 in - 1 x Headset in - 1 x Stereo out
1 x Audio mixer
1 x USB cable
1 x D-Tap to USB cable
1 x SDXC 16gb card
1 x Portabrace bag for Mixpre-6

- +

Mehr Infos  

Sound-Devices 4 XLR/TRS Combo input 8-track audio recorder


For independent filmmakers, field recordists, and Ambisonic enthusiasts who need pristine audio capture of up to four microphones, the Sound Devices MixPre-6 II multitrack field recorder is an ideal tool. Record up to six tracks of external sources (four channels via XLR-1/4" combo jacks and two channels via a 3.5mm mini jack) plus a stereo mix at up to 32-bit / 192 kHz while monitoring your audio headphones.


The MixPre-6 II offers many upgrades over its predecessor. Chief among these features is the ability to record at 32-bit floating point. This makes it nearly impossible for you to clip (distort) audio on the way in. Whether you're recording hot or making use of the unit's astounding 142 dB dynamic range, you'll only be handicapped by the quality of your microphone.


Other improvements include the ability to auto-copy recorded tracks to USB thumb drives, making file transfers a breeze. Lovers of sync will revel in a handy new feature: a full-fledged, built-in timecode generator, accurate to better than 0.2 ppm (0.5 frames in 24 hours). Even when powered off, the MixPre-6 II maintains accurate timecode for up to four hours.


All of this is available in a six-channel package that can be powered from wall chargers, computers, AA batteries, or Sony L-series batteries. Whether you use the device in an advanced or basic capacity, the MixPre-6 II will suit any intimate, field-based production.


Kashmir Preamps


Like the original unit, the MixPre-6 II offers class-A Kashmir mic preamps. All inputs are fully RF-filtered to keep interference out.


Audio Interface Functionality


When connected to a Mac or Windows computer, the MixPre-6 II can serve as an 8-input / 4-output USB audio interface for your favorite audio recording software. The unit will record six tracks in isolation and provide a stereo mix of all six channels to boot.


USB Audio Input


Stream up to four tracks into the unit over USB, using the MixPre-6 II as a recorder from your host device. If you're a musician, you can utilize this feature to record a stereo mix from your host DAW as a backing track for further standalone recording.


A Cornucopia of Connections


For inputs, you'll find four XLR-1/4" combo jacks and a 3.5mm auxiliary input. Audio output connections are handled over 3.5mm jacks. Timecode I/O is made possible via 3.5mm connections, though you also have the option of HDMI for inputting timecode.


Adjust on the Fly


Adjust the limiters, change the bit-depth, shift panning, delay, and polarity in the stereo mix, and filter out extraneous bass rumble with low-cut filters. Whether you record to an SD card or to your computer over USB, the MixPre-6 II can be customized to your needs.


Built-In Timecode Generator & Bluetooth Control


Thanks to the device's timecode generator, you can even trigger recording from the camera. With built-in Bluetooth, you can control the unit over the Wingman app, available from Sound Devices. This app displays high-resolution meters, current timecode, transport buttons, and more.


Ambisonics Integration


Upon installation of the free Ambisonics plug-in (from the Sound Devices Plug-In Store), field recordists, game developers, and VR content creators will appreciate the support for simultaneous multiformat recording (AmbiX, FuMa, LR Stereo, and LR Binaural), real-time binaural/stereo monitoring, and A- to B-Format conversion.


Transport and Mounting Options


The MixPre-6 II is rugged, lightweight, and relatively compact, so you can throw it in a bag or mount it to a tripod or camera.


Key Features at a Glance


- Kashmir microphone preamps with 48V phantom power


- Internal timecode generator


- Sample rates up to 192 kHz


- Bit depths up to 32-bit float


- Adjustable limiters


- SD card recording and reading


- Backup to USB drive


- 10 seconds of pre-roll at 48 kHz


- USB control surface support


- Customize with plugins


- Add low cut, high pass, delay, polarity invert, and panning


- Simultaneous recording, mixing, and USB audio streaming


- Trigger record via timecode or HDMI timecode


- Bluetooth for wireless control via Wingman app


- Basic, Advanced, and custom modes


- High-fidelity headphone amplifier


 



Specifications



 



Portable Recorder



 



Number of Tracks



WAV:

8 (6 Inputs + Stereo Mix)



Max Sample Rate/Resolution



192 kHz / 32-Bit



Microphone



None



Built-In Speaker



None



Display



1.6" / 40.64 mm Color LCD Touchscreen



Memory Card Support



SD, SDHC, SDXC (Up to 512 GB)



Internal Storage



None



Recording



 



Audio File Formats



Recording:

WAV



Sample Rates



WAV:

44.1 / 47.952 / 48 / 48.048 / 96 / 192 kHz 



Bit Depth



16 / 24 / 32-Bit (A/D Conversion)



Signal Processing



Delay, Limiter, Low-Cut Filter



Timecode



Yes



Frame Rates Supported



23.976 / 24 / 25 / 29.97 / 29.97 DF / 30 / 30 DF



Clock Accuracy



±2 ppm / 0.5 Frame per 24 Hrs (Timecode)



Connectivity



 



Analog I/O



4 x Combo XLR-1/4" 3-Pin Female Balanced Line/Mic Input

1 x 1/8" / 3.5 mm TRS Female Unbalanced Aux Input

1 x 1/8" / 3.5 mm TRS Female Unbalanced Headphone Output



Digital I/O



1 x 1/8" / 3.5 mm SMPTE Timecode Input

1 x 1/8" / 3.5 mm SMPTE Timecode Output

1 x HDMI Type-D SMPTE Timecode Input



Phantom Power



+48 V, Selectable On/Off



Phantom Power Current



10 mA per Channel



Plug-In Power



Yes, 3 V



Host Connection



1 x USB Type-C (USB 2.0)

1 x USB Type-A (Control, Text Entry, Thumb Drive, USB 2.0)



Bluetooth



Bluetooth 4.0 (Remote)



Performance



 



Frequency Response



WAV:

10 Hz to 80 kHz ±0.5 dB (At 192 kHz) 



Gain Range



Mic Inputs:

+6 dB to +76 dB

Line Inputs:

-20 dB to +30 dB

Mic/Aux Inputs:

+10 dB to +40 dB

Line/Aux Inputs:

-10 dB to +20 dB

Fader:

Up to +20 dB

Headphone Outputs:

Up to +20 dB



Max Input Level



Mic Inputs:

+14 dBu 

Line Inputs:

+28 dBu 

Mic/Aux Inputs:

-10 dBu 

Line/Aux Inputs:

+10 dBu 



Max Output Level



Outputs:

+7.8 dBu 



Headphone Output Power



300 mW per Channel



Dynamic Range



A/D Converters:

142 dB 

D/A Converters:

115 dB 



Impedance



Mic Inputs:

4 Kilohms (Active-Balanced) 

Line Inputs:

4 Kilohms (Active-Balanced) 

Mic/Aux Inputs:

100 Kilohms (Unbalanced) 

Timecode Input:

20 Kilohms 

Timecode Output:

1 Kilohms 



THD+N



Inputs:

0.005% 



EIN



-128 dBu (A-Weighted) 



Power



 



Power Options



Batteries, USB Bus Power, AC/DC Power Adapter



Battery Type



4 x AA (Included)

2 x L Series (Requires Optional Equipment, Hot-Swappable, Not Included)



AC/DC Power Adapter



5 VDC (Included)



AC Input Power



100 to 240 VAC, 50 / 60 Hz



Physical



 



Mounting Options



1/4"-20 Male (Top)

1/4"-20 Female (Bottom)



Operating Temperature



-4 to 86°F / -20 to 30°C



Storage Temperature



-40 to 185°F / -40 to 85°C



Operating Humidity



0 to 90%



Dimensions



6.5 x 1.4 x 4.6" / 166.0 x 36.0 x 118.0 mm



Weight



19.9 oz / 0.6 kg (Without Batteries)



 


   Sie brauchen Hilfe?
    Sie brauchen Hilfe,
    brauchen Finanzierung,
    Rufen Sie uns an!

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menü

Copyright : Visuals 2003-2024