New

TVOne C2-2855 UNIVERSAL SCALER

78570

New product

SKU: 78570
1 x Video converter
1 x Power supply

- +

More info  

The C2-2855 Universal Scaler PLUS from TV One allows you to convert just about any type of video signal to just about any other signal with less than two frames of latency. It can support resolutions up to 1920 x 1200 at 60 Hz and will accept as well as output composite, component, VGA, DVI, HDMI, and SDI. Additionally, analog audio inputs and outputs allow stereo audio to be embedded or de-embedded from digital video signals. On top of scaling and frame rate conversion, the C2-2855 can also act as a 3 x 3 matrix switcher allowing you to route any of the inputs to any of the outputs.





Flexible Inputs and Ouputs

The C2-2855 features inputs and outputs to cover just about any scenario:





- Inputs: SDI with 3G-SDI, HD-SDI, and SD-SDI support, HDMI, VGA , composite, DVI-U, a stereo 3.5 mm mini jack audio input, and three analog audio inputs on terminal connectors

- Outputs: SDI with 3G-SDI, HD-SDI, and SD-SDI support, HDMI, composite, DVI-U, and one analog audio on a terminal connector

- DVI-U: DVI-U is a combo connector that will pass HDMI, DVI, VGA, component, or composite video signals as well as embedded audio where applicable. An adapter will be required to connect any devices that do not use DVI connectors

- Remote Control Options

- In addition the built-in OLED screen and OSD menu system provided for local operation, RS-232 and IP control are supported by C2-2855. RS-232 allows third-party wired remotes and control systems to be used; while IP control allows the device to be operate from a computer connected to the same network. Control and configuration software for Windows is included





Advanced Features





- Keying: Allows one input to be keyed over a second input. The keyed image may be faded in and out. Precise keying at the pixel level is possible due to 4:4:4 sampling format when using RGB video sources

- Transitions: Permits Seamless Cut, Fade or Wipe transitions when switching between input sources

- Picture-In-Picture (PIP): y allows an input to be inset in a window over a second input or vice versa; the PIP window may be placed anywhere on the screen

- Genlock: Synchronizes video sources internally to ensure seamless switching





Audio Features





- Switching: An internal routing switcher allows any one of the four analog audio inputs to be routed to the analog audio output regardless of impedance. Each audio input is assigned to a video input allowing audio to follow video when switching

- Embedding and De-embedding: Embedded Audio Support allows any audio input to be embedded on all outputs which support embedded audio data (HDMI, DVI-U, and SDI)





Optional Settings





- Size and Position: Automatic via AutoSet or Manual

- Image Size: Users-definable presets

- Image Freeze: One video frame

- Zoom Range: Up to 10x

- Shrink Range: Variable to 10%

- Image Mirroring: Horizontal and vertical

- AutoSet: Automatic picture sizing of computer inputs





Additional Features





- Non-volatile setting memory: settings survive even if device is unplugged

- 24-bit internal color resolution

- 8-bit video encoder / decoder

- Motion compensation and 3:2 pulldown

- Temporal and diagonal interpolation

- Automatic incoming resolution detection

- Less than two frames latency

- 4:4:4 full bandwidth chroma sampling of RGB sources; 4:2:2 sampling of SDI, YC, and CV sources; HDMI and component support for either 4:4:4 or 4:2:2 sampling

- Rackmoutable form factor with rackmouting kits sold separately. One or two units can be placed in a single rack space





in the box





- Universal Power Supply (Brick Type)

- Power Cord

- Control Software For Windows (Vista and Above)





specifications



 





Inputs



Video

1 x Composite on BNC

1 x S-video (Y/C) on 4-pin DIN

1 x HDMI

1 x 3G-SDI on BNC

1 x VGA

1 x DVI-U: Supports composite, component (YPbPr, YUV), HDMI, DVI, VGA (RGBHV, RGBS, RGsB) - adapters required



Audio

3 x Unbalanced audio on terminal connectors

1 x Stereo 3.5 mm mini jack



Note: HDMI, SDI, and DVI-U pass embedded audio



Outputs



Video

1 x Composite on BNC

1 x S-video (Y/C) on 4-pin DIN

1 x HDMI

1 x 3G-SDI on BNC

1 x DVI-U: Supports composite, component (YPbPr, YUV), HDMI, DVI, VGA (RGBHV, RGBS, RGsB) - adapters required



Audio

1 x Unbalanced audio on terminal connectors



Note: HDMI, SDI, and DVI-U pass embedded audio



Maximum Resolution



Analog Computer: 1920 x 1080

Analog Video: 1080p60

HDMI and DVI Computer: 1920 x 1200

HDMI and DVI Video: 1080p60



Supported Frame Rates



SD-SDI

525i: 59.94 Hz

625i: 50 Hz



HD-SDI

720p: 29.97, 30, 50, 59.94, 60 Hz

1080i: 50, 59.94, 60 Hz

1080p: 23.98, 24, 25, 29.97, 30 Hz



3G-SDI

1080p: 50, 59.94, 60 Hz



Latency



1 to 2 frames



Supported Standards



Analog Video

NTSC, PAL, PAL-M, PAL-N, SECAM



HDMI and DVI

DVI 1.0, HDCP; CEC pass-through



SDI

SMPTE259M-C (SD-SDI), SMPTE292M (HD-SDI), SMPTE424M (3G-SDI)



Audio

De-embedding Support: 1 x Stereo pair at 32, 44.1, or 48 kHz from HDMI / 48 kHz from SDI

Embedding Support: 1 x Stereo pair at 48 kHz



Control Method



Local: Front Panel Buttons and OSD

1 x RS-232 on DB9 female

1 x Ethernet on RJ-45 connector



Power Requirements



External Power Supply: 12 VDC at 1.5 A



Operating Temperature



32 to 104°F / 0 to 40°C



Storage Temperature



-4 to 140°F / -20 to 60°C



Humidity



20 to 90% non-condensing



Dimensions



1.6 x 8.6 x 7.4" / 42 x 218 x 189 mm



Weight



2.8 lb / 1.3 kg



    Need help,
    Need financing,
    Call us!

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu