TERADEK 3000 XT + 10K BOLT KIT SDI/HDMI (GEN 2)

1006113

Neuer Artikel

SKU: 1006113
Compatible only with Teradek Side kick 2
1 x Transmitter
1 x Receiver
1 x Receiver Bolt 10K
3 x Power supply
3 x D-Tap to lemo 2 cable
3 x SDI cable
2 x Big antenna
5 x Antenna
2 x Support with screw
1 x Magic Arm

Spare.
1 x D-Tap to lemo 2 cable
1 x SDI cable
1 x Big antenna
1 x Antenna

- +

Mehr Infos  
Teradek Bolt XT 3000 Transmitter/Receiver Set + Bolt 10K HD-SDI/HDMI Deluxe Kit





Bolt XT 3000 Transmitter/Receiver Set



The Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero latency transmitter receiver pair features 3000' line-of-sight transmission distance when used together. You can send and receive visually lossless 3G-video signals from a Bolt 3000 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor. The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals, in both 50 and 60 Hz standards, as well as 480i and 576i. However, 480p and 576p are only supported via HDMI. You can transmit up to three other receiver models such as Bolt 3000 XT, Sidekick II, or 703 Bolt 703, and the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps to keep your transmitted video safe from prying eyes.



Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter



With the Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 3000 receiver with zero latency. The Bolt XT is also compatible with the Sidekick II and 703 Bolt. The transmitter unit itself can be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole, as well as two M3 threaded holes. The included antennas provide a powerful signal that can travel up to 3000' line-of-sight. A shoe mount is included for attaching to cameras without 1/4"-20 threads. For convenience, both a standard BNC cable and HDMI cable are included so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers and built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.



Features

- Backwards compatible with the Teradek universal receivers the Sidekick II and 703 Bolt, which can receive Bolt 3000 XT signals up to 300' away

- HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter

- SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers

- 1/4"-20 and M3 mounting points

 

 



Specifications



 



Construction



Milled aluminum (chassis) and regulation-compliant PCB



Video Inputs



SDI: 1 x BNC (75 Ohm), 3G/HD/SD

HDMI: 1 x HDMI type A receptacle



Video Outputs



SDI: 1 x BNC (75 Ohm), 3G/HD/SD, loop through



Color Sampling



SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)

HDMI: RGB 4:4:4, 8-bit



Latency



<0.001 seconds (Tx to Rx without format conversion)



Supported Resolutions



1080p: 60/59.94/50/30/29.97/25/24/23.98

1080PsF: 30/29.97/25/24/23.98

1080i: 60/59.94/50

720p: 60/59.94/50

480i: 59.94

576i: 50



Video Processing



Compression

Visually lossless

Color Correction

CDL/1024 1D LUT (supports 10-bit color)

33x33x33 3D LUT (supports 10-bit color)



Audio Compression



48 kHz, 24-bit PCM



Audio Input



Embedded



Interfaces



Switches: On/Off and Reset

Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows

USB Interface Functionality: Upgrade via mini-USB



Wireless



Non-DFS Frequencies



UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz



EU & JP: 5.19 to 5.23 GHz

DFS Frequencies



US: 5.27 to 5.55 GHz and 5.67 GHz



EU & JP: 5.27 to 5.67 GHz



RF Power



17 dBm EIRP



Encryption



AES-128



Range



Up to 500' / 152.4 m line of sight



Unicast Multicast



Unicast / Multicast



Noise Rejection



Can coexist with WiFi and 5 GHz cordless phones



Power Input



2-pin connector

7 to 17 VDC



Power Consumption



Nominal 7.3 W (measured at 1080p60)



Operating Temperature



32 to 104°F / 0 to 40°C



Mountable



1 x 1/4"-20 threaded mounting hole

2 x M3 threaded mounting holes



Dimensions



0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm



Weight



8 oz / 226 g





Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver



With the Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver you can receive visually lossless 3G-video or HDMI signals from a Bolt 3000 transmitter with zero latency. The receiver unit itself can be secured via built-in 3/8"-16 M3 threaded holes or the built-in NATO rail. A lightstand adapter is included for mounting on stands. For convenience, a standard HDMI cable is included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector. A D-Tap power cable is included for attaching to a battery. The receiver can share the transmitter with up to three other receivers. It features built-in AES 128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals. 



Features

- The receiver includes built-in cross conversion and Teradek's proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5 GHz spectrum analyzer to keep an eye on interference in your area.

- The receiver features an HDMI output as well as dual 3G-SDI outputs.

- An integrated NATO rail on the receiver, along with several M3 mounting points, and an ARRI compatible 3/8"-16 threaded hole with locating pin holes provide for multiple mounting options.

- SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.

- 5 included antennas for the receiver enable it to pick up signals with clarity

 



 



Specifications



 



Construction



Milled aluminum (chassis) and regulation-compliant PCB



Video Outputs



SDI: 1 x BNC (75 Ohm), 3G/HD/SD

HDMI: 1 x HDMI type A receptacle

USB: 1 x Micro-USB 3.0 Type-B receptacle



SDI Ancillary Data Support



Supports metadata, timecode, and start/stop flags from select camera manufacturers.



Color Sampling



SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)

HDMI: RGB 4:4:4, 8-bit



Latency



<0.001 seconds (Tx to Rx without format conversion)



Supported Resolutions



1080p: 60/59.94/50/30/29.97/25/24/23.98

1080PsF: 30/29.97/25/24/23.98

1080i: 60/59.94/50

720p: 60/59.94/50

576p: 50 (via HDMI only)

480p: 59.94 (via HDMI only)

576i: 50

480i: 59.94



Video Processing



Compression

Visually lossless

Color Correction

CDL/1024 1D LUT (supports 10-bit color)

33x33x33 3D LUT (supports 10-bit color)



Audio Compression



48 kHz, 24-bit PCM



Audio Input



Embedded



Interfaces



Switches: On/Off and Reset

Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows

USB Interface Functionality: Upgrade via mini-USB



Wireless



Non-DFS Frequencies



UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz



EU & JP: 5.19 to 5.23 GHz

DFS Frequencies



US: 5.27 to 5.55 GHz and 5.67 GHz



EU & JP: 5.27 to 5.67 GHz



RF Power



15 dBm EIRP



Encryption



AES-128



Range



Up to 3000' / 914.4 m line of sight



Unicast Multicast



Unicast / Multicast



Noise Rejection



Can coexist with WiFi and 5 GHz cordless phones



Power Input



2-pin connector

7 to 28 VDC



Power Consumption



Nominal 9 W (measured at 1080p60)



Operating Temperature



32 to 104°F / 0 to 40°C



Mountable



1 x 1/4"-20 threaded mounting hole

2 x M3 threaded mounting holes



Dimensions



3.5 x 5.4 x 0.95" / 8.89 x 13.72 x 2.41 cm



Weight



13.3 oz / 377 g






Bolt 10K HD-SDI/HDMI Deluxe Kit



This Bolt 10K 3G-SDI/HDMI Video Transceiver Set includes one transmitter and one receiver with installed V-mount. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero latency transmitter/receiver pair features a staggering 10,000' line-of-site transmission distance when used together. You can send and receive visually lossless 3G-video signals from a Bolt 3000 transmitter with zero latency. The transmitter features a loop out SDI connector so you can feed your on-camera monitor. The receiver has a factory installed V-mount battery plate and features both an SDI and HDMI output. The system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, 480i and 576i & 480p and 576p are only available through the HDMI output. You can transmit up to three other Bolt 3000, Sidekick II, or 703 Bolt receivers, as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps to keep your transmitted video safe from prying eyes.



Bolt 10K Wireless Receiver (V-Mount)



The Teradek Bolt 10K Wireless Receiver can receive an HD or SD video signal from a Teradek Bolt 3000 transmitter up to 10,000' away. Both SDI and HDMI outputs are available on the receiver, and incoming HDMI or SDI signals can be converted to either output. SDI metadata from many popular camera brands is supported, and passed through to outboard monitors or recorders. As part of the Bolt series, the Bolt 10K receiver works seamlessly alongside Bolt 3000, Sidekick II, and 703 Bolt gear. Power can be supplied via the included AC adapter, or, if you're in the field, a V-mount battery on the integrated battery plate. An SDI cable, HDMI cable, USB cable, and light-stand mount are included, and everything fits inside the custom hard case.

 

 



Specifications



 



Outputs



3G/HD/SD-SDI: 1 x BNC

HDMI: 1 x HDMI type A

USB: 1 x USB 3.0 micro-B



Color Sampling



SDI: 10-bit 4:2:2 (8-bit with conversion enabled)

HDMI: 8-bit 4:4:4 RGB



Latency



< 0.001 sec (without format conversion)



Range



Up to 10,000' / 3048 m



Wireless Frequency Range



Non-DFS Frequencies:

US: 5.19-5.23 GHz, 5.755-5.795 GHz

EU/JP: 5.19-5.23 GHz



DFS Frequencies

US: 5.27-5.31 GHz, and 5.51-5.67 GHz

EU/JP: 5.51-5.69 GHz



Resolution Support



1080p: 60/59.94/50/30/29.97/25/24/23.98

1080PsF: 30/29.97/25/24/23.98

1080i: 60/59.94/50

720p: 60/59.94/50

576p: 50

480p: 60/59.94

NTSC

PAL



Video Processing



10-bit CDL/1024 1D LUT

10-bit 33-point 3D LUT



Audio Sampling



24-bit, 48 kHz



Power



Input: 2-pin LEMO

Voltage: 7-28 VDC

Power Consumption: 8.5 W (1080p60)



Operating Temperature



32 to 122°F / 0 to 50°C



Dimensions



9.3 x 9.3 x 2.6" / 23.6 x 23.6 x 6.6 cm



Weight



2.6 lb / 1.2 kg





3D LUTS



Apply the look you're after directly to your wireless video feed using Bolt's integrated 3D LUT technology. Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD.



USB 3.0 Video Output



Bolt's USB 3.0 output makes it simple to ingest a video feed directly into a computer or your DIT cart without any added delay or loss of quality.


 


    Sie brauchen Hilfe,
    brauchen Finanzierung,
    Rufen Sie uns an!

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menü