CONVERGENT DESIGN ODYSSEY 7Q MONITOR / RECORDER (7")

43007

Neuer Artikel

SKU: 43007
1 x Monitor 7” with
battery plate and cage
1 x SDI cable
2 x Batteries
1 x Battery charger
1 x Power cord 2 pins
1 x Power Supply
1 x Magic arm
1 x D-tap to odyssey
power cable
1 x Sunhood with
2x screws

Spare:
1 x D-Tap to odyssey power cable
1 x SDI cable

- +

Mehr Infos  

Convergent Design's Odyssey7Q RAW Monitor & Recorder is an advanced follow-up to Convergent's Gemini 4:4:4 RAW monitor/recorder. The Odyssey7Q features a 7.7" 1280 x 800 OLED display with a 3400:1 contrast ratio and is equipped with advanced image analysis tools, including Vectorscope, Waveform, and RGB Parade. The monitor comes with a compressed DNxHD codec included and also supports several high-speed RAW and HD recorder options, sold separately. The included DNxHD codec will record up to 1080p60/50 10-bit 4:2:2. The firmware for the codec is preloaded and gets activated once you install a Convergent SSD. The monitor supports Convergent Design 2.5" SSDs only and has two built-in SSD slots. 



The Odyssey7Q has two SDI inputs, two outputs, and two bi-directional SDI ports. It automatically detects the incoming video format and when possible creates an entire recorder/monitor setup based on camera metadata. The bi-directional SDI ports can be assigned as either inputs or outputs via menu selection. When these are assigned as inputs, the monitor can simultaneously stream four separate 1080/30p/60i signals from a multicam setup. You can monitor all four in a quad-split screen, and each signal gets compressed and recorded as an individual .MOV file. 



The interface is a capacitive touchscreen and simple to navigate, meaning less setup time. All the controls can also be remotely accessed with an iPhone or Android device via Bluetooth. Most of the inputs/outputs are on the bottom, and 1/4" mounting threads are on the sides. An AC adapter is included for continuous power, and compatible IDX, AB and Sony battery plates are available.



Key Features



*Compressed DNxHD codec included

*Upgradeable to RAW & HD recorder/player

*4 SDI inputs & 2 outputs or 2 inputs & 4 outputs (you get to choose via the menu)

*8 channels (instead of 2 channels) embedded audio, 48kHz, 24-bit

*Four video streams supported simultaneously

*Quad split monitoring with live switching

*Displays image analysis tools in four separate quadrants

*Play back four separate HD video streams

*Onion skinning support (overlay of still and live video)

*Image analysis (Waveform, RGB Parade, etc.) during playback


    Sie brauchen Hilfe,
    brauchen Finanzierung,
    Rufen Sie uns an!

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menü